You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Annual Technical Report on Industrial Design Information Activities in 2014 submitted by

Please fill in your items before submitting your report

Where URLs are requested below, it is preferred that either URLs which are likely to remain stable over time (three years or more) are provided, or home (main) page URLs are provided with a short explanation of how to access the corresponding information.

The expression "industrial designs" covers industrial designs and models.

Offices which issue design patents should report their design patent information activities in this series of Annual Technical Reports.

I. GENERAL OVERVIEW OF RECENT DEVELOPMENTS IN INDUSTRIAL DESIGN INFORMATION ACTIVITIES CARRIED OUT BY THE OFFICE

Statistics: changes in terms of application filings and grants (registrations) with respect to previous year; trends or areas experiencing rapid changes

Changes experienced in terms of application filings and grants (registrations) with respect to the previous year

Compared to 2013, there were changes in industrial design activities as follows:

 2014Compared to 2013
National design application333- 25 % (441)
  • submitted by domestic applicants
325- 23 % (420)
  • submitted by foreign applicants
8- 61 % (21)
  • number of designs contained
1164- 11 % (1309)
Designs registrations419+ 10 % (382)
  • domestic applicants
389+ 6 % (368)
  • foreign applicants
30+ 114 % (14)
  • number of designs contained
1424+ 26 % (1133)
Trends or areas experiencing rapid changes with respect to the previous year

Since 2008, progression of the number of industrial design applications has a sinusoidal character with amplitudes from 305 (min) to 457 (max). The number of design patterns contained in these applications has also a sinusoidal character with period of 4 – 5 years and with average values about 1250 design pattern. Concerning amount of registered industrial designs, there is a moderate increase – approximately 10 % compared to 2013. The increase of designs contained in registrations has increased even more – by 26 %, compared to 2013.

Other matters and useful links (URLs): annual report of the Office, news page, statistics, etc.

Statistics

Since 2000 the Annual Reports and statistics have been available at the Office’s website:

http://www.upv.cz/en/publications/annual-report/annual-report.html

The Bulletin: http://www.upv.cz/en/publications/ipo-bulletin.html

The Office website

The helpdesk: helpdesk@upv.cz

List of news and events: http://www.upv.cz/en/ipo/current-news/actual.html

Electronic filing of industrial design applications: http://www.upv.cz/en/client-services/on-line-filing.html

Element of proceedings: http://isdv.upv.cz/portal/pls/portal/portlets.rejst.formular?lan=en

Legislation related to all IP rights: http://www.upv.cz/en/legislation.html

 FAQ: http://www.upv.cz/en/information-sources/faq.html

Search service – industrial design database (IPO CZ,) (basic search/advanced search): http://www.upv.cz/en/client-services/online-databases/industrial-design-databases.html

Use of an electronic classification system to check the International classification for industrial designs: http://www.upv.cz/en/publications/classsification-systems/classification--industrial-designs.html

II. SERVICES AND ACTIVITIES RELATED TO INDUSTRIAL DESIGN INFORMATION CARRIED OUT BY THE OFFICE

Information and support provided by the Office to applicants regarding filing on paper and/or e-filing (instructions, seminars, etc.) - URLs

The Office website http://www.upv.cz/en.html is rich source of information.    

Electronic filing of industrial design applications: http://www.upv.cz/en/client-services/on-line-filing.html

Element of proceedings: http://isdv.upv.cz/portal/pls/portal/portlets.rejst.formular?lan=en

Search service:http://upv.cz/en/client-services/information-services/search-services.html

Fees and payments: http://www.upv.cz/en/client-services/fees.html

Information on business procedure related to industrial designs: http://upv.cz/en/ip-rights/industrial-designs.html

Information on Services: http://www.upv.cz/en/client-services/information-services.html

Publications: http://www.upv.cz/en/publications.html

Industrial design databases: http://www.upv.cz/en/client-services/online-databases/industrial-design-databases.html

Industrial classification system: http://www.upv.cz/en/publications/classsification-systems/classification--industrial-designs.html

Availability of the application dossier in electronic form

The content of the file (element of proceedings) is available at: http://isdv.upv.cz/portal/pls/portal/portlets.rejst.formular?lan=en

Classification and reclassification activities; classification system used, e.g., International Classification for Industrial Designs (Locarno Classification), other classification

The 10th edition of the Locarno Classification has been used since January 1, 2014; The Office reclassified all registered designs according to this latest edition.

Bibliographic data and processing

The 10th edition of the Locarno Classification has been used since January 1, 2014; The Office reclassified all registered designs according to this latest edition.

 

III. SOURCES OF INDUSTRIAL DESIGN INFORMATION PROVIDED BY THE OFFICE

 

Main types of publications in the field of industrial design information, outline of the content (industrial design applications, design patents, registrations, etc.) and medium (on paper, on CDs, online - URLs)

Office notices are published weekly in the electronic Official Bulletin of the Industrial Property Office of the Czech Republic. Notices are also published at the Office’s website.

Mass storage media used are hard discs, magnetic tapes for backup and paper.

Official Gazettes: main types of announcements, frequency of publication, medium (on paper, on CDs, online - URL), etc.

Publishing, including printing, copying techniques and electronic printing

Lists of designs which have been registered, renewed, corrected, or which have requested restoration are published weekly in the Official Bulletin of the Industrial Property Office of the Czech Republic. Since 2007 an electronic weekly (updated on Wednesdays) bulletin has been published at the Office´s web site (http://www.upv.cz/en.html). No prior registration or subscription to view the Bulletin is needed; however the pdf viewer (e.g. Adobe Reader ) must be installed. The information as published should be the authentic one for legal purposes.

Main types of announcements of the Office in the field of industrial design information

Office notices are published weekly in the electronic Official Bulletin of the Industrial Property Office of the Czech Republic. Notices are also published at the Office’s website.

Mass storage media and microforms used

Used mass storage media are hard discs, magnetic tapes for backup and physical original in paper version.

Databases and office automation

Registered designs are searchable in the public database. It provides a range of search options including proprietor, designer, image, indication of the product, legal status, date of filing, registration and publication, and Locarno class and subclass. The Official Bulletin picks up data from the internal database.

Information products (coverage, medium, etc.) available to examiners, including external documentation and databases

The Office’s Examiners have an access to:

Information products (coverage, medium, etc.) and services available to external users; conditions of access (e.g., free of charge, subscription, etc.)

National and international industrial design (paper) documentation

Legal status information (kind of information, coverage, medium, etc.)

Internal and public Industrial Design databases

Other sources

Access to online industrial design bulletin and to other sources of designs information, including download of bulk industrial designs data

The Official Bulletin URL: http://www.upv.cz/en/publications/ipo-bulletin.html

The public database URL: http://upv.cz/en/client-services/online-databases/industrial-design-databases.html

IV. ICT SUPPORT TO SERVICES AND ACTIVITIES RELATED TO INDUSTRIAL DESIGN INFORMATION CARRIED OUT BY THE OFFICE

 

Specific software tools supporting business procedures within the Office: general description, characteristics, advantages, possible improvements

 

Within the Office, there are obeyed, maintained and improved several business management systems:

  • ISO 9001 – QMS (Quality Management System) helps to assure a constant level of quality of services provided by the Office
  • ISO14001 – EMS (Environmental Management System) is used to help organizations (a) minimize how their operations (processes, etc.) negatively affect the environment (i.e., cause adverse changes to air, water, or land); (b) comply with applicable laws, regulations, and other environmentally oriented requirements, and (c) continually improve in the above.
  • ISO 27001 – ISMS (Information Security Management System) specifies a management system that is intended to bring information security under explicit management control. Fields of concerns are Security policy, Asset management, human resources security, access control, incident management system etc.
  • OHSAS 18001 – (Occupational Health and Safety Advisory System) helps companies to propose and implement precautions that, wherever possible, remove, reduce risks or isolate employees from them in a workplace. In case this is not possible, working activities have to be planned and managed through organizational precautions so that employees’ performance was safe and healthy.

 The business process management system (BPMS) internally named ADONIS that describes the office’s processes flow structure is also deployed, maintained and improved. Each employee can find information on organizational structure, valid laws, rules and other documents, available applications, databases and information systems.

Hardware used to supporting business processes of the Office

Workstations - HP, processor  Core2Duo, Core I3 and Core I5, RAM 1- 4 GB, HDD 160 - 250 GB. 300 workstations connected in the Office network are of the Office staff direct service. Thereof 50 computers connected in the Office network are intended for the clients of the Office and staff training service The Office uses the ETHERNET network and computers run WINDOWS Seven operating system. MS OFFICE – 2003/2007/2010 software. The Office uses CD, DVD and magnetic tapes as data mediums.

Internal databases: coverage, updates, interlinks with external sources

In-house systems (online/offline)

The Office maintains an in-house search database of national applications of industrial designs  and registered industrial designs. The database is not accessible to the public but its structure corresponds to the public database (contains only national registered industrial designs since no. 3500).

External databases

The Office provides publicly free access to the database comprising the data concerning registered national industrial designs since no. 3500 at the IPO CZ website http://upv.cz/en/client-services/online-databases/industrial-design-databases.html .

 The Office also performs searches in  design databases freely accessible in the Internet such as Hague Express Database, eSearch plus (previously RCD Online” database), DesignView (both maintained by OHIM) and other national databases. The links to these databases are provided at the Office´s web site (http://www.upv.cz/en.html).

Establishment and maintenance of electronic search file: file building, updating, storage, documents from other offices included in the search file

File building

The industrial design search file consists of the collection of registered industrial designs of the Czech Republic and Czechoslovakia. The full retrospective collection of registered and published industrial designs is accessible via public database. The database contains bibliographic data as well as images of approx. 32 500 published registrations. The oldest data comes from the 1966/67 turn of the year.

Updating and Storage, including mass storage media

The data is updated daily and stored electronically (official databases, hard discs, magnetic tapes for backup) and in a paper version.

Documentation from other offices maintained and/or considered part of the available search file

Collections of official bulletins of foreign offices are available in an electronic (CDs/ DVDs, Internet) or in a paper version. WIPO and Community Design Bulletin are available in electronic version via Internet (new volumes) and in CD/DVD version (previous volumes).

Administrative management electronic systems (register, legal status, statistics, and administrative support)

The Office uses the internal information system SYPP2(starting from January 2014) to proceed the applications of patents, supplementary patent certificates, utility models, industrial designs, trademarks and geographical indications. The system has been developed since 2011 as a major upgrade of previous version SYPP which was used from 2004 until 2013. The new application is more flexible, based on Oracle Forms with easier maintaining and more flexible data structure. Data are stored in xml format including the history. The system is also more user-friendly. System is  connected with central registers of the Czech Republic (ISZR). The project was co-financed by the European fund for regional development within the EU project Enforcement of Industrial Property Rights..The system enables to maintain official registers of all the industrial property rights. Furthermore it archives all incoming and outgoing communications of the Office, provides the information on the state of proceeding, legal status of registrations and statistical data. The Document Management System (DMS) is integrated as well.. The system also processes foreign applications within PCT and the European patents valid in the territory of the Czech Republic. The data are transferred to the electronic Office’s Bulletin and to the public search database. The system  is compatible with electronic filing recognizing authorized electronic certificates. The on-line filing system was launched in August 2006, the current version of on-line filing system was released in September 2009. Starting from January 2008, the system produces automatic electronic extracts from registers upon online request.

Information services available to the public

The information centre and the helpdesk operate during the working days. They provide the general information concerning the industrial property rights.

Design information services for the public are provided within the information centre, in the public reading room, common questions can be addressed to the helpdesk (helpdesk@upv.cz) and search requests to the search section. The Office received a total of 6 design  search requests in 2014.(Since 2014 there has been a change in the methodology of statistical records of searches). A total of 1200 searches  (for patents, designs, trademarks) was provided for the State administrative bodies.

The Office provides full range of brochures and flyers free of charge. They can be downloaded in PDF format from the Office´s web site, taken in the office headquarters or sent upon request. The Office publishes its own books and the Industrial Property Journal (6 issues per year) reflecting the current issues of IP rights.

V. PROMOTION ACTIVITIES AIMED TO SUPPORT USERS IN ACCESS AND EFFICIENT USE OF INDUSTRIAL DESIGN INFORMATION

Office's library (if deals with industrial design information): equipment, collection management, network of libraries in the country, cooperation with foreign libraries

Publications related to different business procedures and industrial design information sources available to users, for example, books, brochures, Internet publications, etc.

Cooperation with universities, technology and innovation support centers, etc.

Education and training: training courses, e learning modules (URLs), seminars, exhibitions, etc.

Other activities

VI.INTERNATIONAL COOPERATION ACTIVITIES IN THE FIELD OF INDUSTRIAL DESIGN INFORMATION

International exchange of industrial design information in machine-readable form (e.g., Official Gazettes)

Participation in international or regional activities and projects related to industrial design information

Assistance to developing countries

Other activities

VII. OTHER RELATED MATTERS

  • No labels